?>
Start the work with the concrete bird bath bowls.
- Lay polyethylene film on a firm surface (a wooden board, a piece of metal).
- Put wet sand and form a little hill using it, so that the bird bath could accumulate water inside of it.
- Cover this little hill with a piece of polyethylene film and put a leaf (rhubarb, burdock, fern) on it.
- Make a solution. It should not be too liquid. You can either buy a ready-made concrete mixture at the hardware store or mix sand with cement by a ratio of 3 to 1. Such mixture should be diluted with water.
- This solution should be put on the leaf, thus a thickness of this layer should be about 2 cm in the middle and about 1 cm at the edges.
- Make a stand-support for liquid dish. For this purpose insert a piece of plastic pipe with a diameter of about 10 cm and the length of 10-15 cm into the center of the water dish. The pipe should be filled with cement solution.
- Cover the product with polyethylene film, leaving a gap for ventilation, and wait for its drying (at least 2-3 days).
Then just put off the polyethylene film and remove the leaf from the surface.
Here is important chapter on bird bath designs. We have the cool sources for bird bath designs. Check it out for yourself! You can get Do It Yourself Concrete Bird Bath guide and see the latest Decorate Your Garden with Concrete Bird Bath in here.
The market of the time offers several types of finch bird feeders. They are plastic tubes, mesh socks and platforms. Each of them has its own advantages and disadvantages. Let’s consider each type separately. Plastic tubes have a long service life, but they are prone to be destroyed by squirrels. […]
Vintage things are always trendy, so a vintage bird bath may become a fascinating addition to the whole garden or lawn interior. The old tubs for fliers are often made of metals like bronze, cast iron or they may be made of stone and sometimes concrete. The designs for these […]
Bird feeder hangers are very comfortable tools to install a manger without troubles wherever you want. The most part of them can be hung without additional accessories. There are different types of brackets; S-shaped, extended, station kits, chains, wires and twines. Chains and wires are represented in different length and […]